Daily maintenance of strong acid filling machine
Filling machine as an important production tool, especially the strong acid filling machine， has a certain degree of accuracy requirements, so after the strong acid filler used for a certain period of time, it must be maintained.The following will introduce the strong acid filling machine maintenance process from Suzhou Vstar Autoweighing Co.,Ltd.
一、Check whether there is looseness and damage to the whole joint of the strong acid filling machine. If there is looseness, reinforce it in time. If there is damage, replace relevant accessories in time.
二、For the calibration of the weighing station, because the strong acid filling machine has extremely high requirements on the accuracy, so it is necessary to timely carry out the calibration of the checkweigher, and carry out the inspection after the calibration.If there is still a large error after calibration, it is necessary to timely repair checkweigher.
三、Check whether the PLC electrical control box is excessively damp to prevent the electrical control box from short-circuiting and causing accidents.
四、In the inspection of the strong acid filling machine, to carry out a careful inspection of the drip leakage device.If the anti-drip device is found to be unable to work normally, the machine should be stopped in time, and the anti-drip device should be replaced on the premise of safety, so as to ensure that there will be no leakage of acidic solution to the work table and cause accidents in the process of machine operation.